Laser welding is a kind of high energy density laser beam as a heat source, to locally heat the material in a small area, and then dissolve the material to form a specific melting tank to achieve the welding effect. Laser welding is mainly used in thin wall materials, precision parts and this welding, can achieve spot welding, splicing welding, sealing welding, stack welding, etc., small thermal de, deformation, beautiful, formation, high welBANd quality, do not need secondary welding treatment. In recent now, vanilaser welding have been widely used in stainless steel, carbon steel, galzed plate, copper, aluminum and other products welding.
 
Hand-held laser welding machine using handheld swing welding head, flexible and simple operation, without professional welder technology, suitable for small batch production and processing, widely used in sheet metal processing, cabinet kitchen utensils, cabinet cabinet, stair handrail, elevator escalator, display shelves, doors and Windows, advertising model, stainless steel products, and many other industries.

Features
•Smooth and beautiful weld, reduce the subsequent grinding process, save time and cost
•Welding workpiece without deformation, no welding scar, welding firm.
•Less material for laser welding, long life.
•More Safe and Environmental.

Process contrast
 

Contrast the project	Traditional welding	laser beam welding
Heat input to the workpiece	very high	low
Deform of the workpiece, and the bite edge	big	small
Binding strength with the base material	same as	beyond compare
Follow-up processing	polish	No grinding, or very little grinding
speed of welding	same as	More than 3 times that of argon arc welding
Applicable materials	Stainless steel, carbon steel, galvanized plate	Stainless steel, carbon steel, galvanized plate, aluminum alloy, copper
Operation difficulty	complicated	simple
Operators' security	unsafe	safe
Environmental protection impact	Not environmental protection	environmental protection
Welding fault tolerance	good	good
Wobble welding	not have	have
The spot width is adjustable	not have	have
crater	clear	non constat
Welding quality comparison	same as	fine

-Clamping device can hold gas nozzle with max.28mm of OD. No need to change V-block.
-High precision and rigidity of imported pneumatic motor with high torque, which helps to remove heavy spatters. with overload protection to achieve long lifetime
-Closed oil spray space, waste oil can be collected and recycled environmental friendly
-High precision, high regidity cylinder to keep high precision of repeated positioning.
-With TCP tip
-Full-automation, No manual operation.

Technical parameter

Cutting Method	Flame/Plasma		Single Flame	Single Plasma
Specification	KZ-2206H	KZ-2506HD	KZ-2206H	KZ-25060
Cutting Range	2.2m*6m	2.5m*6	2.2m*6m	2.5m*6m
Height Adjustment	Electric	Automatic	Electric	Automatic
Input Voltage	AC220V±10V ≤ 1KW
Travel Speed	≤12000mm/min
Running Accuracy	≤0.3mm
Cutting Accuracy	≤0.5mm
Flame Cutting Thickness	≤160mm
Plasma Cutting Thickness	≤40mm(Size of the plasma power determines)
Track Length	Standard 6.6m(Length can be increased or decreased, 2.2m/section
Cutting Material	carbon steel plate、stainless steel plate、aluminum plate and other materials

RM1600 COMPLETE SET !!!  
-MIG200B WELDING MACHINE WITH 3 FUNCTION ARC WELDING & MIG WELDING & TIG WELDING
-Co2 GAS
-Co2 GAS REGULATOR
-TROLLEY
-0.8 MIG WIRE
-EARTH CLAMP
-MIG MB15 TORCH
-Auto Darkening Head Shield

MODEL	SCT-1000
Input Voltage	VAC 230,1o , 50/60Hz
Rate Input Current	A                  6
Rate Input Power	KVA                1.2
Output Current	ADC          20~60
Output Open Circuit Voltage	VDC                20
Rate Duty Cycle @ 25d’	%                     60
Power Efficiency	%                     85
Power Factor	%                           93
Isolation Class	Level                      F
Degree of Protection	Level                         IP21S
Dimension(W*D*H)	MM                230*330*300
Weight	KG                               4

Feature :
-Smaill and light weight , portable and durable , reliable and economical
-Achieves fast and effective results
-Can be used for weld-cleaning and polishing
-Perfect weld cleaning solution
-Safe and easy operate

HN3015-1000W SPECIFICATION
ITEM	project name	Parameter
1	Equipment model	HN-4015C-1000W
2	Processing format	4000 × 1500 (mm):
3	bed frame	Full square tube welding, quenching treatment
4	Y-axis transverse effective cutting range	3000mm
5	X-axis longitudinal effective cutting	1500mm
6	Z-axis travel	150mm
7	Laser power	1000W (RAYCUS)
8	power supply	3-phase 380V, 50HZ
9	CNC system	FSCUT CNC System
10	Display	17-inch LCD
11	interface	R232, USB, industrial control
12	rack	Taiwan imported YYC four-side grinding
13	guide	Taiwan imports, Taiwan stability
14	Reducer	Japan Xinbao
15	Servo drive system	Japan Yaskawa Servo Motor
17	Workbench maximum load	Both load 2500Kg
18	Maximum acceleration	1.5G
19	Slit width	0.15-0.3mm
20	Cutting head	Swiss Raytools series, Swiss Jiaqiang
21	Jiao long	F150MM
22	Capacitance height follow	Raytools
23	Minimum setting unit:	0.001mm
24	beam	Cast aluminum
25	Water cooling	Wuhan Hanli
26	protecting mask	√
27	Controllable shielding gas	√
28	Edge detection	√
29	Gas system	√
30	Red light indication	√
31	Expert database	√
32	Longmen overall transportation	√
33	Compressed air supply system
34	Drawing system	√
35	Fixed console	√
36	Alarm lighting system	√
37	Machine noise level:	≤75db
38	Cutting surface slope	≤1 degree, small deformation
39	wavelength	1070 nm
40	Laser divergence angle, (half angle)	Less than 1.5mrad
41	Motion axis data
42	X axis:
43	Fast moving speed	100m/min
	X-axis positioning speed	80-100m/min
	stroke	3000mm
	positioning accuracy	0.03mm/1000mm
	Repeatability	0.01mm
	Resolution	0.001mm
44	Y axis:
	Fast moving speed	80m/min
	Y axis positioning speed	80-100m/min
	stroke	1500mm
	positioning accuracy	0.03mm/1000mm
	Repeatability	0.01mm
	Resolution	0.001mm
45	Maximum linkage speed	≤129000mm/min
46	Z axis:
	Cutting head lifting stroke	150mm
	Resolution	0.001mm
47	Laser cutting special features:
47.1	Fast response surface following.
47.2	Missing and cutting back mode: Allows the operator to return instantly when a missed cut is found.
47.3	High speed response guarantees corner cutting quality.
47.4	Settable laser two-stage punching function to improve punching quality
47.5	Linear/circular interpolation and kerf compensation
47.6	Flying punching function for thin plate cutting; no pause during cutting of the thin plate, obviously improving cutting efficiency
47.7	Laser marking function. On the cut sheet, it can be marked after cutting to facilitate production management.
47.8	Automatic edge finding rotation

 
Kindly contact us for more information!

MACHINE PARAMETER 

Model	MIG 250
Input Voltage	Single Phase 220 +15 %
Duty Cycle	60%
Power Factor	0.85
Efficiency	85%
Type Of Wire Feeder	Embedded
Post – Flow Time (S)	1
Diameter Of The Coil (MM)	270
Diameter Of The Wire (MM)	0.8/1.0
Size Of The Machine (MM)	530 x 270 x 440
Weight (Kg)	26
Thickness (MM)	0.8
Insulation Class	F
Protection Class	IP 21
	MIG	ARC
Input Current (A)	38	43
Power Capacitance (KVA)	8.4	43
Output Voltage (VDC)	15~26.5	21~30
Output Current Range (A)	25~250	10~250

Robot Features

1. To achieve the highest level of operation speed in the industry and
shorten the operation cycle time;
2. 5,6-axis motor is built into the arm to avoid interference with fixtures and workpieces;
3. The cables required for the welding configuration are built into the body. Avoid interference from the rear of the arm;
4. Stabilize and improve welding quality to ensure its uniformity;
5. Improve productivity, continuous production 24 hours a day;
6. Improve the working conditions of workers and work for a long time in harmful environments;
7. Can realize batch product welding automation;
SF10-C2080 Robot Performance Parameters

Project		Applications: ARC Welding, Handling, Loading and Unloading
Structure		Polyarticular
Number of Joints		6Axis
Placement method		Ground Installation
Maximum Operating Speed	J1 AXIS	166 /s
	J2 AXIS	166 /s
	J3 AXIS	166 /s
	J4 AXIS	500 /s
	J5 AXIS	288 /s
	J6 AXIS	500 /s
Maximum Motion Range	J1 AXIS	+170
	J2 AXIS	-157 /+100
	J3 AXIS	-166 /+188
	J4 AXIS	+155
	J5 AXIS	-137 /+134
	J6 AXIS	+220
Maximum Radius of Activity		2080MM
Hand Load		Maximum 10Kg
Repeat Accuracy		+0.08MM
Robot Base Size		355*355MM
Robot Height		1640MM
Working Environment Humidity		0~45 C
Robot Body Weight		280Kg
Drive Method		AC SERVO DRIVE
Environment Humidity		95%RH below (No Condensation)

Kindly contact us for more information!

Model	IS-168
Rated Input Voltage (V)	AC240V + 15 % 50/60Hz
Rated Output	120A/24.8V
Rated Input Power (KW)	3.04
Rated Input Current (A)	13.8
Welding Current Range (A)	20~120
Output Current Voltage (V)	24
No-Load Voltage (V)	66
Rated Duty Cycle	60%
Efficiency (%)	85
Power Factor	0.93
Protection Class	IP 23
Insulation Class	B
Size (MM)	230 x 110 x 150
Weight (KG)	2.8

Kindly contact us for more information!

Year End Promotion!
We are now offering the best price for AIM MIG 200 Welding Machine Set.
AIM MIG 200 Welding Machine,
Complete with:
*Trolley
*Co² Gas 6kg (new)
*MIG wire 5kg
*Earth Clamp with cable
*Co² regulator
*Auto Darkening Head Shield

Kindly contact us for more information!