Aim Tech Welding
System Sdn Bhd
7865, Jalan Teluk Batu 1,
Batu 4 1/2, Jalan
Kebun Seksyen 36,
40470 Shah Alam,
Selangor, Malaysia.
+603-5161 7213
+603-5161 7593
kevinquay@gmail.com
info@aimtechwelding.com.my
+60123702467
KING TABLE CNC FLAME PLASMA CUTTING MACHINE
| Previous | 1 / 2 | Next |
1.Especially Designed for thin sheet cutting, and best performance cutting thickness is from 0.5 to 3mm. Maximum working speed can be 15m per minute.
2.Suggest work with plasma generator with P80 torch. We will supplied water pump and water spray equipments, that can help decrease smoke and dust during cutting and decrease the sheet heat distortion during plasma cutting.
3.Used air cylinder to control torch lifting up and down, that make the machine higher cutting efficiency.
4.This machine is widely used in air hose, advertisement and kitchen area, and it can work with expanded software like CAMDUCT.
5.It is in low price, and easy to operate.
2.Suggest work with plasma generator with P80 torch. We will supplied water pump and water spray equipments, that can help decrease smoke and dust during cutting and decrease the sheet heat distortion during plasma cutting.
3.Used air cylinder to control torch lifting up and down, that make the machine higher cutting efficiency.
4.This machine is widely used in air hose, advertisement and kitchen area, and it can work with expanded software like CAMDUCT.
5.It is in low price, and easy to operate.
|
Name
|
KING TABLE CNC FLAME PLASMA CUTTING MACHINE |
||
|
Model no. |
KING-1530T-BT |
KING-1530T-ST |
KING-1530T-SE |
|
Effective Cutting Range X*Y |
1500*3000mm |
||
|
Customized Information |
Available to customize water table or ventilation table |
||
|
Driving configuration |
Dual drive 86 series step motors with dual synchronous belts |
Dual drive 86 series step motors with dual planetary belts |
Dual drive A6 Panasonic servo motors with planetary reducers |
|
Tool And Torch Quantity |
Single tool with plasma torch |
Single tool, and can be both with plasma and flame torch |
|
|
Torch Height Control |
Air cyliner control up and down |
Plasma arc voltage auto torch height control or flame capacitive auto torch height control |
|
|
Max. Working Speed |
12000mm/min |
6000mm/min |
12000mm/min |
|
Input Power |
Single phase AC 220V 1200W |
Single phase AC220V 1200W |
Single phase AC220V 1600W |
|
Torch Lifting Distance (Z) |
≤100mm |
||
|
Working Precision |
±0.1mm/m |
||
|
Flame (Gas) Cutting Capacity |
Piercing capacity: 5-60mm Edge start cutting: 5-120mm |
||
|
Plasma Cutting Capacity |
Depends on the plasma source’s cutting capacity |
||
|
Cutting Table and Base |
Standard collection drawers cutting table, which carry under 2 ton weight |
||
|
Needed Installation Area (With Plasma Supporter) |
W 2.2m* L 4.2m* H 1.5m |
||
|
Packing Size |
3980*2270*1580mm |
||
