Aim Tech Welding
System Sdn Bhd
7865, Jalan Teluk Batu 1,
Batu 4 1/2, Jalan
Kebun Seksyen 36,
40470 Shah Alam,
Selangor, Malaysia.
+603-5161 7213
+603-5161 7593
kevinquay@gmail.com
info@aimtechwelding.com.my
+60123702467
POSITIONER CNC-100/200/300
| Previous | 18 / 19 | Next |
Designed to give maximum positioning flexibility by using the tilting and rotation of the table to manipulate the work piece into the appropriate angle for welding on small valve and flang as manufacturing requirements.
Feature
Feature
- For annular welding, cutting, polishing, and assembly.
- Easy to set up a welding center equipped with chuck, tracks, torch holders or stop cone.
- Micro computer programme accurately control system.
- Programme specify accurate delay time and angle of rotation.
- Main body frame: 1pc
- Electrical cabinet: 1pc
- Foot switch: 1pc
-
Remote control panel: 1pc (optional)
Specification
| Model | CNC-100 | CNC-200 | CNC-300 |
| Horizontal Capacity | 100kg | 200kg | 300kg |
| Vertical Capacity | 50kg | 100kg | 150kg |
| Rotation Speed | 0.05-9r/min | 0.05-5r/min | 0.05-5r/min |
| Tilt Angle Range | 0o-90o/hand wheel | 0o-90o/hand wheel | 0o-90o/hand wheel |
| Table Diameter | 400mm | 400mm | 500mm |
| Height of Table | 500mm | 500mm | 600mm |
| Table Hole Size | 45mm | 45mm | 90mm |
| Motor | 86 stepper | 86 stepper | 86 stepper |
| Weight | 80kg | 85kg | 120kg |
| Applicative Chucks | KD-200/300/400 | KD-200/300/400 | KD-300/400 |
| Input Voltage | 1 PH 220V 50~60HZ | 1 PH 220V 50~60HZ | 1 PH 220V 50~60HZ |
