Aim Tech Welding
System Sdn Bhd
7865, Jalan Teluk Batu 1,
Batu 4 1/2, Jalan
Kebun Seksyen 36,
40470 Shah Alam,
Selangor, Malaysia.
+603-5161 7213
+603-5161 7593
kevinquay@gmail.com
info@aimtechwelding.com.my
+60123702467
AIM AC/DC TIG-200 WELDING MACHINE
| Previous | 4 / 6 | Next |
| Model | ACDC TIG-200A |
| Rated Input Voltage (V) | AC 220V |
| Input Frequency (Hz) | 50/60 |
| Rated Input Current (A) | 32.5 |
| Output Current Range (A) | 10-200 |
| No-load Voltage (V) | 44 |
| Rated Input Voltage (V) | 18 |
| Preflow (S) | 0-2 |
| Vale Value Current (%) | 20-80 |
| Down Slope (S) | 0-5 |
| Post-Flow (S) | 2~10 |
| Remote Control | Yes |
| Arcing Ways | Transfer |
| Efficiency (%) | 80 |
| Duty Cycle (%) | 60 |
| Power Factor | 0.73 |
| Insulation Grade | F |
| Housing Protection Grade | IP21 |
| Net Weight (Kg) | 22.1 |
| Dimension (MM) | 560×364×302 |
Product Speciality
1.AC/DC manual welding, AC/DC pulse TIG function of a machines;
2.Special AC arc control circuit,AC current 20-400A,the arc focus,a good weld;
3.Pulse frequency 0.5-500HZ, pulse peak,the base value of current,duty cycle,clearing width adjustable;
4.From the arc current ,arc current income ,current ramp item,fall time adjustable;
5.2T/4T repeat function,easy to operate;
6.phase protection,overvoltage ,undervoltage,overcurrent ,overtemperature comprehensive protection;
7.Panel /remote control interface with the outside foot switch;
8.Against power fluctuations and strong ,320-430V to work.
