Aim Tech Welding
System Sdn Bhd
7865, Jalan Teluk Batu 1,
Batu 4 1/2, Jalan
Kebun Seksyen 36,
40470 Shah Alam,
Selangor, Malaysia.
+603-5161 7213
+603-5161 7593
kevinquay@gmail.com
info@aimtechwelding.com.my
+60123702467
ENRICO MIG-200 MIG WELDING MACHINE COMPLETE SET
| Previous | 3 / 13 | Next |
ENRICO MIG 200 MIG WELDING MACHINE
Standards Accessories
MIG Welding torch, Regulator, Electrode Holder, Earth Clamp, Mask, Wire Brush with Chipping Hammer.
💥ITEM INCLUDE💥
📢ENRICO MIG200 MIG MACHINE
📢3 METER MB 15 MIG TORCH
📢EARTH CLAMP WITH CABLE 3M
📢ELECTRODE HOLDER WITH CABLE 3M
📢0.8MM GAS WIRE ( 5KG )
📢WELDING GLOVE
📢ANTI SPATTER JELLY
📢SOLAR AUTO DARKENING WELDING HELMET
📢Co2 GAS REGULATOR
📢Co2 GAS CYLINDER 10L
| Model | MIG-200 |
| Input Power Voltage | AC240V |
| Input Frequency | 50/60Hz |
| Rated Input Power | 6KVA |
| No Load Voltage | 58V |
| Output Current | 50A-180A |
| Duty Cycle | 60% |
| Feeding Speed m/min | 1.5-14 |
| Type of Wire Feeder | Inside |
| Diameter of Spool | 200mm |
| Insulation Class | F |
| Protection Degree | IP21S |
| Diameter of Wire | 0.8-1.0mm |
| Diameter of Rod | 2.6-3.2mm |
| Weight | 6.35Kg |
| Dimensions | 44x22x32 cm |
Standards Accessories
MIG Welding torch, Regulator, Electrode Holder, Earth Clamp, Mask, Wire Brush with Chipping Hammer.
